Select Page

perma NOVA

Single-Point / ElectroChemical Automatic Lubricator


  • Ideally Suited for Applications w/ High Variations in Temperature
  • Electronic Control Unit w/ Integrated Temperature Compensation
  • Intrinsically Safe IP 65 Protection
  • Temperature Independent Discharge During Entire Discharge Period
  • Reusable Control Unit
  • Constant Discharge Setting & Function Display
  • Discharge Period Setting From 1 to 12 Months
  • Can Use Where Explosive Atmospheres May Occur (EX-Certification)
  • Dust & Water-Jet Proof

perma NOVA can be used for all applications that are within a temperature range of -20°C up to 60°C (-4°F up to 140°F). A built-in temperature sensor periodically measures the ambient temperature and the control unit calculates the required gas generation based on this data.  This ensures a continuous and controlled discharge. perma NOVA consists of a reusable control unit, a lubricant canister filled with 130cc of grease or oil and a protection cover. perma NOVA is especially suitable for single-point lubrication of roller and sliding bearings, shaft seals and chains located in areas with considerable temperature variations (e.g. food industry) or where intrinsic safety is a requirement (e.g. oil and gas industry).




  • Ambient Temperature Does Not Need to Be Taken Into Consideration When Setting the Discharge Period
  • Simple Handling & Setting Adjustments
  • Broad Range of Dispensing Rate Settings to Suit Equipment Demands or Planned Maintenance Cycles
  • Discharge Not Influenced by Temperature Changes
  • Provides Higher Performance Capabilities at Sites Which Require Intrinsically Safe Equipment
  • Reliable Operation in Critical Areas
  • Improved Safety & Lower Costs Than Manual Lubrication